Travel Tuesday: How I Converted A Citroen Xsara Picasso into A People Carrier Campervan Conversion
Today I want to talk about ROADHOUSE (my car camper)
Have you ever dreamed of owning a car that fits comfortably into a parking bay and STILL lets you sleep in it, stretched out, comfy and flat? That was the plan when I sold my £7500 Golf to buy a £600 Citroen Xsara Picasso (it was a category C write off, and had just been repaired when I bought it).
I reviewed the Citroen Xsara Picasso in a previous article, to tell you all of its good and bad points. In a future article, I’ll talk about WHY I swapped my VW Golf for a Picasso. Here I wanted to talk about how I converted the Picasso, and what we actually do when we’re on the road and we want to use our car as a camper.
There were some big problems I needed to overcome in order to “convert” my car. Here are the things I did, in order (click to go straight to that section or scroll to read the lot):
Took back seats out – NOTE this gets you an MoT advisory because it stops them checking rear seat belts, so put seats back in for your MoT.
Here we go then:
Took back seats out
– NOTE this gets you an MoT advisory because it stops them checking rear seat belts, so put seats back in for your MoT.
They were pretty easy to take out. They have a lever at the back, then you tilt the seat forward, and jiggle it with brute force and ignorance until it comes out. Swearing at it is optional. Why did I say easy? They were VERY easy when compared to a lot of other cars I’ve looked at, and they are designed to be removable so it wasn’t anything like trying to get the seat pad of the VW Golf out. My husband custom-built a storage unit in one of our spare bedrooms to keep the seats when we don’t want them in the car. This also makes the car more fuel efficient because they’re slightly heavy at around 15kg (which is the same weight as a cardboard fry box full of frozen McDonald’s fries).
Made window blocking panels.
I bought some silver coated insulating bubble wrap, at £7.99 a roll from Homebase. One window at a time, I held the insulation up against the car window and drew the shape of each window on separate areas of the bubble wrap, cutting each out before moving on to the next window. I was going to attach it with stickyback velcro, but when we set off for Europe I realised I’d left it behind, so I ended up using gaffer tape (duct tape, duck tape, same diff) and that was an okay fix although the condensation in the car caused the tape on the back window to unstick a lot and the stickiness of the tape damaged the panels so we couldn’t use the same ones again.
Bought a memory foam mattress and stuffed it in.
I bought mine off Ebay, I literally went for a 3 inch thick “memory foam” mattress. I had investigated a lot of options including cot mattresses, inflatables and roll mats, and decided this £17.99 memory foam mattress would be the cheapest. They had a two inch option at £14.99 as well but we thought that was sacrificing comfort. We just folded the lower end so that it would fit in the car, and after we got back from Europe we took it out of the car and put it on our bed to make it warm and cosy over winter. Update: We had to chuck it out after 15 months because it started to stink. It was still pretty cheap but I’m looking into other ways to do the same thing. To be honest you don’t really need it in summer even in the Highlands, but in the Alps, or in winter, something like this is essential.
Added a ceiling luggage storage.
I got some of that fabric that net curtains are made out of, and sewed it over some elastic at either end, then tied the elastic together and attached this to the handles above the rear doors. If there had been somewhere to attach it front centre this would have been a great storage idea, but as it happens it was mostly in the way and didn’t fit an awful lot in because it didn’t stay on the ceiling at all.
Removed it again after Europe.
I scrapped that idea for now, so storage is still an issue.
Scrapped window panels after Europe.
I decided that storing them in the car when you’re on a long journey is far too much hassle (you can’t legally have them in the windows when you’re driving which means you need to put them somewhere), so I looked at other options.
Put curtains in.
Basically I was SO squeamish about permanently damaging the car, because there were NO tutorials for how to put curtains into your car, so I used the thinnest drill bit available and drilled very thin holes into the plastic either side of the back windows, then screwed some eye hooks into the holes. I tied string to the eye hooks and sewed some curtains out of cheapass satin material that I had hanging around after I made a dress. I also used some nice ribbons as curtain ties to keep them out of the way as they tend to blow around the car if either of the front windows are open and you’re driving. I keep the bottoms of the curtains attached to the windows during sleep times by using the sticky back velcro that we forgot to take to Europe. It doesn’t stand up to a lot of force but if you open and close the velcro pieces carefully they’re a great solution to this problem.
Added a shoe holder for storing smaller items:
I dangled it down the back of the driver seat. It’s basically a fabric thing with loads of pockets, so we keep gloves, deodorant, binoculars etc in the little pockets, helping us to stay organised in a small space.
(the Citroen Xsara Picasso car campervan tragically died due to a gearbox failure on a busy set of traffic lights – I was very ill at the time and had to force the car through the traffic lights so the damn engine seized up. We are currently driving the hilariously inappropriate Rover 75, where I have installed the behind-the-seat storage just as it was in the Picasso, and the picture above is a photo of the back of the driver seat in the Rover 75).
Fitted the memory foam mattress
For Scotland, I had to change the shape of the mattress because we had to fit a kayak in there as well as our usual luggage. So I cut some of the length and width off the mattress so it also didn’t need to be folded at the foot end, giving us more foot room and making it more manoeuvrable if we needed it out of the way for any reason.
Draped a blanket over the two front headrests.
When we went to Europe we used one of those silver reflective panels in the front windscreen but it kept falling down and then people could see into the back of the car where I often needed to get dressed (I’m a chick. Sleeping in underwire gets uncomfortable after a couple of days. I also physically cannot sleep in socks). On our Scotland trip I realised that a fleece blanket or a microfibre towel does the job just fine. They can be easily removed when we want to pass through to the front of the vehicle or for when I’m driving so I still have full visibility.
Future plans for our camper:
1. Proper ceiling storage. I’m still not sure what to go for here, having exhausted every search term to try and find some inspiration, but once I work it out I’ll do an article on it.
2. Ventilation. I want to drill wall vents into the side of the car (on the non-petrol side) but since I drove the car through a wall on the petrol side a couple of months ago, I’m not sure if it still has the structural integrity to withstand more damage to the body.
3. Other storage. I need more storage solutions, although we fitted all our luggage and a kayak in with us when we went to Scotland a few weeks ago, it could still be better organized.
4. Rear window curtain – I was most recently using that silver sunshield gaffer taped to the back window because I haven’t made curtains for the rear yet.